Heat Seal Platen Press – Free Testing & Prototyping – contact Freeman SCHWABE



SCHWABE Heat & Seal Press  provides uniform heat distribution and temperature control across the entire platen surface.

We can also as the SCHWABE OEM Rebuild Remanufacture your existing Press with electrically heated platens.


SCHWABE Heated Platen Hydraulic Presses are designed, engineered & assembled in Cincinnati, Ohio USA to meet the needs of your application.

Press size, tonnage, cycle parameters, dwell time, heat specifications and the level of control software sophistication are all designed to maximize your manufacturing process.

The SCHWABE Heated Platen Hydraulic Press can use top heat, bottom heat or both depending upon your application or your customer’s requirement. Material can be sheet fed or off of roll good material with equal utility




Die Cut Heat Seal

  • Operators have the ability to program and save pressure & platen position values, temperature specifications including accurately controlled ramp-up and ramp-down (cooled) rates, and desired dwell time.
  • Temperature accuracy can be controlled with a basic single-zone controller or a more accurate multiple zone system for increased temperature uniformity across the platen and bed of the press.Heat Seal SCHWABE
  • Standard Schwabe Heated Platen Hydraulic Presses have an operating temperature up to 550 degrees F/287 degrees C. The heated platens include a layer of insulation between the moving platen of the press and the press bed if a bottom heated platen is used.
    Each Schwabe Heated Platen Hydraulic Press comes equipped with its own temperature control zone that is set and displayed on the operator panel.

SCHWABE Heat Seal Applications

Ideal applications that lend itself well to Heated Platen Presses include various applications with different types of textiles, non-woven materials and synthetic fibers used for insulation and sound dampening properties can include die cut, crease/seal applications with or without punches etc.

• Under carpet
• Under side of hoods
• Behind firewalls
• Under headliners
• Inside doors

 FREE TESTING / PROTOTYPING of  our company Heat & Seal Material Application 

SCHWABE Heated Platen Hydraulic Press at Manufacturing Plant in Cincinnati, Ohio


+1 513 947 2888

This entry was posted in Schwabe Die Cutting. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s