Cutting Press with Manual Progressive Feed System – Auto Interior Trim

Re-Manufactured SCHWABE USA SR 230

Straight Ram Hydraulic Beam Press  with NEW Manual Progressive / Incremental Feed System

The SCHWABE USA Central Guide Straight Ram Hydraulic Beam Press with four (4) cylinder hydraulic system; the cylinders also act as the actuating mechanism of the press, pushing down from a top structure vs. pulling down from a bottom structure.

The cylinders are mounted inboard on the press in order to create a matching deflection between the head and bed, rather than having the head and bed gap
the way conventional four post presses tend to do.

The heavy duty, rigid, large diameter center guide is used to keep the head and bed parallel vs. a hydraulic balancing system or some type of linkage/toggle mechanism. The Schwabe exclusive design eliminates the need for adjustment should the system be carrying an unbalanced load

There are only five (5) moving parts in the Schwabe SR design; there is no linkages thereby resulting in less scheduled maintenance and easy serviceability.

Watch machine demonstration on Freeman Schwabe YouTube channel

SCHWABE USA Straight Ram Hydraulic Beam Press

SCHWABE Straight Ram Hydraulic Beam Presses Capabilities

Cut Roll or Sheet Goods
Handles Large Die Boards with Large Amounts of Rule
Kiss Cutting Capabilities Through Mechanical Stops
Feed Systems – Roll Feed, Clamp Feed, Single & Dual Sliding Tables,
Manual & Powered Tables, Progressive Die Cutting, Vacuum Die Cutting
Matching deflection between Head and Bed of hydraulic press
Eliminates the need for complex balancing systems.
No more than 5 moving parts in the SR design
No Linkage involvement, means less scheduled maintenance and less spare parts inventory.
Schwabe SR hydraulic system is freestanding for easy access for maintenance.

Made in Cincinnati, Ohio, USA