Model SR 350 Straight Ram Hydraulic Beam Press with Urethane Cutting Belt Feed System
Cutting Force – 350 U.S. Tons
Head & Bed Size – 104”D x 54”W
Effective Cutting Area – 100”D x 50”W
Cutting Stroke – 8” adjustable
Daylight Opening – 9”, from head to bed without cutting surface or feed system
Stroke Control – Controlled by Linear Transducer for accurate and repeatable head position during cutting stroke
Steel Safety Stop Blocks – Act as a preventative device for cutting through the belt.
Strokes per Minute 4-5
Cutting Surface – Urethane Belt
Watch machine demo on Freeman Schwabe YouTube Channel
Die Loading – The press will have side die loading on the 104” press side (material feed direction)
Die Mounting – Pneumatic die clamps with automatic front and rear center pull-up clamps. Must include precision x and y location blocks with accuracy of +/- 0.03”.
Hydraulic System – Freestanding hydraulic powered unit includes pump, hoses, valves, gauges, etc.
Hydraulic system to shut down after 5 minutes of idle time
Position hydraulic exhaust fan upward for ventilation purposes
Hydraulic Oil – Type #46-AW; Buyer to supply
Includes Sound Enclosure – 75 db
Material Alignment Device – Accuracy of +/- 0.03”
Meets or exceeds all OSHA machine safety requirements including specification 1910.217(f) as interpreted by Manufacturer.
Head Safety Block – For working under the head of the press.
E-Stop Safety Relays – These relays provide 3 primary functions:
Detect faults on safety-related electrical control circuits (i.e. faults in sensors, wiring, contactors, etc.)
Provides an ensured switching action.
Provides a manual reset facility.
Rigid extruded profile aluminum framework with expanded 1” black mesh panels around feed system/press, including various electrically interlocked access doors with Allen Bradley Guardlock switches.
Power Requirements – 460V, 3 phase, 60 cycle (CONFIRMED)
Panel Control – Allen Bradley Compactlogix PLC and Panelview touch screen operator interface controls (menu driven). Includes 250-die memory for recall of feed length, sheet rows, etc., accessed thru a touch screen). Includes various production/maintenance reports (screens) menu driven as well as computerized diagnostics with Ethernet capability for internet
Operation – 1275mm (50.2”) W x 2510mm (98.8”) L x 18mm (0.7”) thick and 1275mm (50.2”) W x 2510mm (98.8”) L x 28mm (1.1”) thick sheets are manually aligned and fed from the staging area (customer supplied) onto the press cutting belt which is servo driven and includes powered material guides.
Features of Feed System:
Cutting Surface – Urethane Cutting Belt
Belt conveyer cleaner – stationary brush type which helps remove material particulate/debris.
Servo motor positioning system on the cutting belt.
Belt shifter, shifting distance of +/- 1/2”
Includes in-feed sheet sensor
Outfeed Conveyor system with a sensor to stop the material once it has reached the end of the outfeed conveyor. Once the conveyor is cleared, the press cycle will continue. Includes a foot pedal for the Operator to jog material from outfeed conveyor onto customer’s table. Outfeed conveyor is approximately 100” long inspection area with a frequency drive.