Die Cutting Luxury Vinyl Floor Planks
SCHWABE USA Straight Ram Hydraulic Beam Press MODEL SR230 with Custom Feed System
Cutting Force: 230 U.S. Tons
Head & Bed Size: 60”D x 80”W
Cutting Stroke: 0” to 8”, fully adjustable
Daylight Opening: 12”, from head to bed
Cutting Speed: 12 strokes per minute, assuming a 1.0” stroke and 61” Slab depth.
Stroke Control: Controlled by Linear Transducer for precision.
Positive Stops – Wedge style steel stop blocks enhance belt life and prevent accidental cutting through the belt.
Die Mounting – Six (6) fixed position pneumatic clamping cylinders located on the head of press lift and clamp into position, maximum weight of 4,500 lbs. Dies travel along robust lateral with hard end stop for accurate positioning every time.
Safety Guarding – Meets or exceeds all OSHA machine safety requirements including specification 1910.217(f) as interpreted by Manufacturer.
Type IV light curtain in front of the pick and place unit, in feed, and out feed sides of the press, total three (3).
Rigid extruded profile aluminum framework. Lexan panels around feed system/press, including various electrically interlocked access doors with OSHA compliant switches.
Head Safety Block – For working under the head of the press.
E-Stop Safety Relays
Side Die Load/Unload Capability
– Allows die to be easily loaded/unloaded from left side of Press from Customer supplied die cart. Dies will be able to be changed in equal to or less than 3 minutes. Improved Operator safety and speed. Does not require any overhead cranes, hoists, lifting gear, die attachments etc. Approx. 90” x 120” in size
located to the left of the Press on Infeed side.