Luxury Vinyl Planks die cut on Nylon Belt Feed Handling System

Cutting Luxury Vinyl Planks with Nylon Belt Feed System

SCHWABE USA Straight Ram Hydraulic Beam Press Model SR 230 features:
• Automatic Slab Pallet Transfer
• Automatic Side Die Loader
• Recycle / Scrap Convey
• Die Transfer Cart
• Die Maintenance Cart

General Specifications

Cutting Force – 230 U.S. Tons

Head & Bed Size – 60”D x 80”W
Cutting Stroke – 0” to 8”, fully adjustable
Daylight Opening – 12”, from head to bed
Cutting Speed – 12 strokes per minute, assuming a 1.0” stroke and 61” Slab depth.
Stroke Control – Controlled by Linear Transducer for precision

Cutting Surface – Nylon cutting belt, see section 4 for more details
Hydraulic System – Freestanding hydraulic powered unit includes pump, hoses, valves, gauges, etc. Featuring RexRoth Cylinders, Valves and Pumps.



Infeed Outfeed

InFeed Material Handling System

Type – Continuous nylon cutting belt, traveling through press, utilized as a material carrier and cutting surface, driven by a drum roller.


Sheet feeder designed to feed Slabs up to 61”D x 78.7”W.
Slab Sizes – 1.25M x 2M (49” x 78.7”) and 1.55M x 2M (61” x 78.7”)
Slab Thickness – 1.5mm to 5mm
Slab Weight – 68 pounds

Tile Sizes will be 12” x 24” and 24” x 24” 
Plank Sizes will be 6” x 48”

Vacuum Cups releases Slab onto 45 degree down incline with pusher bar positioning the Slab, approximately 80” long. Photocells controls stoppers and pushers assuring the Slab is the exact position before moving onto the cutting belt.


OutFeed Material Handling System

Parts conveyor: ~80” long removes parts from the cutting belt, a space between the cutting belt and conveyor lets the scrap fall to an awaiting scrap conveyor. 

Features of Feed System:
 Cutting Surface – Nylon Cutting Belt included
 Belt conveyer cleaner – stationary brush type
 10” of take up on belt tensioning device; makes changing belt quick and easy.
 Leading edge sheet sensor.2HP servo motor positioning system, positional accuracy of +/- 0.005” (belt only)
Belt shifter, shifting distance of +/- 1”; greatly extends the life of the belt.


This entry was posted in Die Cart, Floor Covering manufacturing Equipment, Luxury Vinyl Planks, Schwabe Die Cutting and tagged , , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s