Come and visit us at
Auto Interiors EXPO on Oct 22-24th Novi, MI
Schwabe USA Model Straight Ram Hydraulic Beam Press With Single Sided Die Vacuum System Model SR675
60” Deeper Platen = Faster Cycle Speed 2 Vacuum Blowers & Hose = More Power 60” PLATEN DEPTH = LESS CUTS = INCREASED CYCLE SPEED Cycle Speed – This 675 ton Schwabe press with a 60”platen depth requires less cuts to complete a standard 216” die board. Total cycle speed is approximately 30% faster than previous generation.
Country of Manufacture – USA
Press Driving Mechanism – Hydraulics
Cutting Force – 675 U.S. Tons
Head Size – 60” Deep x 73” Wide
Bed Size – 60” Deep x 84” Wide (between frame), with wear plate 60”D x 84”W x 1⁄4” thick.
Die Board Size – 74.25” Wide x 216.25” Long
Maximum Material Width – 74″
Cutting Stroke – 8” adjustable, with reduced pressure die setting.
Daylight Opening – 12”, without cutting surface, this must be confirmed.
– Incrementally programmed power-operated chase feed system consisting of one (1) Chase Feed on the infeed of thepress and two (2) extension tables with controls.Designed for lateral power transfer on and off the chase feed of 74.25” Wide x 216.25” Long die boards. Die Board Transfer Arms – for both sides of the infeed.Electrical – High performance variable speed drive; feed and return speeds are variable.
Vacuum Shroud Lift Units on Infeed of Press Low profile; mounted on press feed system; underside of unit to be approximately 16” above Chase Feed; equipped with Vacuum lift unit, all controls, including an air blow-off to release vacuum cups. Two (2) Vacuum Blowers & Hose Floor mounted under vacuum lift side of extension table; Vortex type, with pressure relief valve. Vacuum unit to be provided with blower switches so that air can be blown into the shroud after the cutting operation for faster shroud removal.