SCHWABE USA Straight Ram Hydraulic Beam Press with Single Sided Die Vacuum System
Die Cutting Auto Interior Trim Parts / Components High Volume / Accurate & Precise Cut
For more information, please contact
Country of Manufacture – USA
Press Driving Mechanism – Hydraulics
Cutting Force – 675 U.S. Tons
Head Size – 60” Deep x 73” Wide
Bed Size – 60” Deep x 84” Wide (between frame), with wear plate 60”D x 84”W x 1⁄4” thick.
Die Board Size – 74.25” Wide x 216.25” Long
Maximum Material Width – 74”
Cutting Stroke – 8” adjustable, with reduced pressure die setting.
Daylight Opening – 12”, without cutting surface, this must be confirmed.
PROCESSES A SINGLE DIE BOARD UP TO 18 FEET LONG, OR MULTIPLE DIE BOARDS [MAXIMUM LENGTH 18 FEET] IN LESS THAN 90 SECONDS
Panel Control – Allen Bradley PLC and touch screen operator interface controls (menu driven). Includes 250-die memory for recall of feed length, sheet rows, etc., accessed thru a touch screen). Includes various production/maintenance reports (screens) menu driven as well as computerized diagnostics with Ethernet capability for telephone diagnostics/trouble-shooting.
Operational – Controls for set-up and operation, with low pressure die height setting.
Press Shutdown – Mushroom type shut-off button easily assessable at the control panel and on all corners of the machine.
Activation – Push button activation after input of information thru the Operator Interface/Touch Screen.
Stroke Counter – With automatic shutdown accessed through the Touch Screen; capable of counting 9999 strokes.
Ewon Device Remote Connectivity – Included.
Type – Incrementally programmed power-operated chase feed system consisting of one (1) Chase Feed on the infeed of the press and two (2) extension tables with controls.
Power Transfer for Carrier Plate – Designed for lateral power transfer on and off the chase feed of 74.25” Wide x 216.25” Long die boards. Die boards to have stubby pins on either end to be used for the power transfer unit to grab onto the die board for the transfer.
Fixed Die Board Transfer Arms with 4 wheels – for both sides of the infeed.
Electrical – High performance variable speed drive; feed and return speeds are variable. This drive is connected to a pull chain mechanism for powering the Chase Feed through the press, and will also assist in locating the Chase Feed for pick-up/drop-off of vacuum shroud.
For more information contact firstname.lastname@example.org